Options For The Front Display - Topfield TRF-2470 User Reference

To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the in-
formation box will not be displayed when you switch services.
However, pressing the
box. If you set this option to Never Hide, the information box
will always be displayed. For the information box, see §5.2.3.
In addition, you can raise or lower the position of the infor-
mation box. Set the Info Box Position option as you desire. Its
available range is
tion, the lower the information box will be positioned.
To use an animation effect when changing menu, set the Ani-
mation option to Enable.
If any service's name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the Text Scroll option to anything other than Disable.
With the choice of Full Scroll, it will be fully scrolled until its
end disappears; with the choice of Part Scroll, it will be scrolled
only to its end.

4.7 Options for the front display

4.7 Options for the front display 29
button will display the information
10 to +3 lines. The higher you set the op-
To set the options for the front
display, select the Settings >
Front Display menu. You should
see a screen like the left figure.