Table of Contents
Advertisement
11.2 From the firmware server via the Internet
You can update the firmware from the firmware server which
is being run by Toppro via the Internet. Make sure that the
digital receiver is connected to your router before configuring
the network settings on the digital receiver.
NOTE
For detailed description about how to set up the router, refer
to the manual of your router.
To enable the digital receiver to update the firmware automat-
ically when a new firmware is available, set the Automatic Up-
grade option to Enable. Otherwise if you want to do that by
yourself, select the Start firmware upgrade option, then you get
asked for confirmation. With the choice of Yes, it will check up
whether a new firmware is available, and it starts firmware up-
date if any.
11.2 From the firmware server via the Internet 87
5. Place the highlight bar on the right firmware file and
£
¢ ¡
press the
button, and a countdown will be displayed
OK
on the front display of the digital receiver.
6. When the message of 'END' appears, restart the digital
receiver.
Installation
Select
the
Firmware
Upgrade
work Firmware Upgrade menu.
You should see a screen like the
left figure.
>
Net-
>
Hide quick links:
Advertisement
Table of Contents
