Network Setup; For A Wired Connection - Topfield TRF-5300 User Reference

66 Accessing via Network
2.
Whenever a new dynamic IP address is assigned to the router,
it will inform the DDNS service provider of the new IP ad-
dress. This makes it possible that you access the router with a
domain name at any time.

9.2 Network setup

9.2.1 For a wired connection

1. Connect your Ethernet cable from your router to the Top-
2. Press Installation
3. Select Wired/Wireless LAN. Then select Wired as the pre-
4. It is recommended to use a dynamic IP address by the
5. Once a connection has been set scroll down to activate
6. A successful connection will populate all the IP settings
which should be supported by your router.
e your router with the account so that it can
communicate with the web site.
pro recorder.
Network Setting
ferred connection.
router therefore select DHCP as the connection type.
However if a static connection is set then please refer to
your router for an IP address, Subnet Mask, Gateway,
Primary DNS, Secondary DNS.
e and press the OK button on the remote.
and the Level/Quality bars on the TV screen will show
a high percentage level.
IP Setting.