34
Facing Overview
Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Optional non-combustible facing may be installed on the fireplace. Use the guidelines below to determine
the location (also see the following pages for detailed diagrams.
Tile Line
Any non-combustible facing under 1" (25mm) thick (see "Thin Facing" on page 35).
Masonry Line
Any non-combustible over 1" (25mm) thick (see "Thick Facing" on page 37).
Hearth Line
Non-combustible hearth/facing should be installed up to this location (1" (25mm) above the base
of the fireplace). The fireplace may be raised to accommodate thicker hearth materials.
Optional Faceplates – Sizing Chart
Name
FPX Artisan, Classic, Fr Ctry
Winthrop Victorian Lace
Wilmington Hearthview
Winthrop Bungalow
© Travis Industries
Installation
Height
Width
35-3/4"
41"
(908mm)
(1041mm)
34-1/8"
36-7/8"
(867mm)
(937mm)
35-3/4"
41"
(908mm)
(1041mm)
34"
36-7/8"
(864mm)
(937mm)
(for qualified installers only)
NOTE: The hearth or facing can extend no
greater than 1'' (25mm) above the base of the
fireplace. The fireplace may be raised to
accommodate thicker hearth materials.
Notes
45-3/4" (1162mm) Radius – May fit over top of tile
facing
Optional facing will butte to edge of faceplate (tile
line)
May fit over top of tile facing
Optional facing will butte to edge of faceplate (tile
line)
4090227
100-01220_000