Travis Industries 864 TRV GreenSmart Installation Manual page 67

Optional Equipment
16 Disconnect the power lead from accent light and connect it to the power lead included with this kit
(see Figure 24). Attach the power lead to the fan controller in the "AUX OUT" receptacle (see
Figure 25).
NOTE: If using the optional fan, you will want to disconnect its power lead and connect it to
the extra power lead included with this kit, then connect it to the "FAN" receptacle on
the fan controller.
17 Attach the included velcro to the bottom of the fan control module and to the base of the fireplace
near back left of the fireplace. Slide the fan controller into place and secure using the velcro
(see Figure 26).
© Travis Industries
(for qualified installers only)
Figure 24
4090227
67
Figure 25
Figure 26
100-01220_000