Windscreen Washers; Rear Window Wiper And Washers - Ford B-Max Owner's Manual

To reduce smearing we recommend the
following:
• Lower the sensitivity of the autowipers.
• Switch to normal or high speed wipe.
• Switch the autowipers off.
A High sensitivity
B On
C Low sensitivity
The wipers will function when moisture is
detected on the windscreen. The rain
sensor will continue to monitor the amount
of moisture on the windscreen and adjust
the speed of the wipers automatically.
Use the rotary control to adjust the
sensitivity of the rain sensor. With low
sensitivity, the wipers will operate when
the sensor detects a large amount of
moisture on the windscreen. With high
sensitivity, the wipers will operate when
the sensor detects a small amount of
moisture on the windscreen.
Keep the outside of the windscreen clean.
Sensor performance will be affected if the
area around the interior mirror is dirty. The
rain sensor is very sensitive and the wipers
may operate if dirt, mist or flies hit the
windscreen.
Wipers and Washers

WINDSCREEN WASHERS

Note: Do not operate the washers when
the washer reservoir is empty. This may
cause the washer pump to overheat.
Push the button to operate the washers.
They will operate for a maximum of 10
seconds. When you release the button, the
wipers will operate for a short time.
REAR WINDOW WIPER AND
WASHERS
Intermittent Wipe
Pull the lever toward you.
41