Windscreen Washers - Ford Focus 3 c346 2013 Manual

B A
C
E15 38 11
A Low sensitivity
B On
C High sensitivity
If you switch autowipers on, the wipers
will not cycle until water is detected on
the windscreen. The rain sensor will then
continuously measure the amount of
water on the windscreen and adjust the
speed of the wipers automatically.
Adjust the sensitivity of the rain sensor
using the rotary control. With low
sensitivity, the wipers will operate when
the sensor detects a lot of water on
the windscreen. With high sensitivity,
the wipers will operate if the sensor
detects a small amount of water on the
windscreen.
Wipers and washers

WINDSCREEN WASHERS

and never when the reservoir is empty.
Whilst the lever is pulled towards the
steering wheel the washer will work in
conjunction with the wipers.
After releasing the lever, the wipers
operate for a short time.
-39-
E15 38 12
WARNING
Do not operate the washer for
more than 10 seconds at a time,