Instrument Panel ( & ) - HYOSUNG Comet 250 R User Manual

INSTRUMENT PANEL
(
�
�
�
�
�
�
�
� �
�
�
�
�
①
TRIP METER
The trip meter is a resettable odometer
located in the speedometer assembly. It can
be used to indicate the distance traveled on
short trip or between fuel stops. Turning
control button ⑨ to clockwise will return the
meter to zero.
② ②
ODOMETER
The odometer registers the total distance
that the motorcycle has been ridden.
③ ③
SPEEDOMETER
The speedometer indicates the road
speed in kilometers and miles per hour.
)
&
�
�
�
�
�
�
�
④ ④
FUEL METER
It indicates the remaining fuel amount in
the fuel tank.
The " F " (Full) mark indicates the fuel
tank is full.
The " E " (Empty) mark indicates the fuel
tank is empty or nearly so. (the remaining
fuel is 2.1 ℓat the " E " (Empty) mark, the
capacity is 17.0ℓ )
Fill the fuel tank before " E " (Empty)
mark.
The fuel gauge indicates the remaining
amount whenever the ignition switch is
"ON" or "OFF".
For checking the remaining amount of
fuel, hold the motorcycle vertically and
set the ignition switch "ON".
⑤ ⑤
TACHOMETER
The tachometer indicates the engine
speed in revolutions per minutes (rpm).
⑥ ⑥
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated
either to the right or to the left, the indicator
will flash at the same time.
⑦ ⑦
NEUTRAL INDICATOR LAMP
The neutral indicator lamp will come on
when the transmission is in neutral.
The lamp will go out when you shift into
any gear other than neutral.
⑧ ⑧
HIGH BEAM INDICATOR LAMP
The high beam indicator lamp will come
on when the head lamp high beam is
turned on.
27
CAUTION