HYOSUNG Comet 250 R User Manual page 69

◉ ◉ TURN SIGNAL LAMP
1. Remove the lens by removing the screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new bulb, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.
◉ ◉ TAIL / BRAKE LAMP
1. Remove the rear seat.
To remove the rear seat, insert the
ignition key into the lock and turn it
clockwise.
2. Turn the socket to the counter-clockwise
and pull it out at the lamp housing.
3. Push the bulb, turn it to the counter-
clockwise, and pull it out.
4. To fit the replacement of bulb, push it in
and turn it to the clockwise while pushing.
69