Ignition Switch; Instrument Panel - HYOSUNG GV 650 C Owner's Manual

INSTRUMENT PANEL

CAUTION
When the ignition switch is turned to the
"ON" position, the display of speedome-
ter will come on.
WARNING
Operating the display of the instrument
panel while riding can be hazardous.
Removing a hand from the handlebars
can reduce your ability to control the
motorcycle.
Always keep both hands on the handle-
bars while riding.
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated
either to the right or to the left, the green
indicator will flash at the same time.
HIGH BEAM INDICATOR LAMP
The blue high beam indicator lamp will
come on when the head lamp high beam is
turned on.
NEUTRAL INDICATOR LAMP
The green neutral indicator lamp will
come on when the transmission is in neu-
tral.
The lamp will go out when you shift into
any gear other than neutral.
COOLANT TEMPERATURE WARNING
LAMP
The red coolant temperature warning
lamp will come on when the coolant gets
too hot while operating.
When coolant temperature is higher than
120 (248
warning lamp comes on.
Operating the motorcycle while the
coolant temperature warning lamp is lit
can damage your motorcycle.
Continued operation of the motorcycle
with high engine coolant temperature
may result in engine damage or prema-
ture wear.
If the coolant temperature warning lamp
comes on, stop the engine and allow it
to cool before restarting.
Refer to the note below.
N O T E
High engine speed, low vehicle
speeds, or heavy load can increase
engine coolant temperature.
Decrease engine speed, reduce
load and select an appropriate
transmission gear to lower the
temperature.
Debris or mud in front of the
engine or packed between the radi-
ator fins can reduce cooling ability.
Remove any debris or mud pre-
venting air flow to the engine.
23
), the coolant temperature
CAUTION