Rinnai VT16-26 Installation Manual page 2

Continuous flow water heaters
Table of Contents

Advertisement

Important:
This appliance must be installed in accordance with:
- Manufacturer's installation instructions
- Current AS/NZS3000, AS/NZS3500, AS/NZS 5601.1 and G12/AS1
- Local regulations and municipal building codes
For use with Natural Gas or Universal LPG as indicated on the appliance.
Not suitable as a spa or swimming pool heater.
Rinnai continuous flow internal water heaters
('i' models) must be installed with an approved Rinnai flue system.
Appliance must be installed, commissioned and serviced by an authorised
person, being in New Zealand a licensed gasfitter, in accordance with
these instructions and all applicable local rules and regulations.
Warning
Improper installation, adjustment, alteration, service or maintenance can
cause property damage, personal injury or loss of life.
For more information about buying, using, and servicing of Rinnai appliances
call: 0800 RINNAI (0800 746 624)
Rinnai New Zealand Limited
105 Pavilion Drive, Mangere, Auckland
PO Box 53177, Auckland Airport, Auckland 2150
Phone: (09) 257 3800, Fax: (09) 257 3899
Email: info@rinnai.co.nz
Web:
www.rinnai.co.nz, www.youtube.com/rinnainz

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd200Hdi200Ef24Ef250Efi250Hd250

Table of Contents