Table of Contents
Advertisement
PARTS DIAGRAM
1. Control panel
2. Louvers
3. Carrying handles
ASSEMBLY & INSTALLATION
INSTALLATION
Before connecting the appliance to a power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
L
OCATION
The air conditioner should be placed on a firm foundation to minimize noise and vibration.
The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to roll the unit over objects.
The unit must be placed within reach of a properly rated grounded socket.
Never place any obstacles around the air inlet or outlet of the unit.
Allow 14 inches to 40 inches of space from the wall to the window for efficient air conditioning.
7
4. Casters
5. Air filter
6. Air inlet
Count On NewAir
7. Cord storage
8. Exhaust air outlet
9. Water plug/drainage port
Advertisement
Table of Contents
