Gateway MG1 Service Manual page 146

Screws removed during this task:
140
CHAPTER 3: Replacing notebook components
2 black M2×3 (Modem)
2 black M2.5×5 (Fans)
To replace the fan(s):
1
Complete the steps in
2
Remove the cooling assembly by following the instructions in
cooling assembly" on page
3
If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in
4
Remove the hard drive by following the instructions in
on page 69.
5
Remove the DVD drive by following the steps in
page 73.
6
Remove the keyboard cover by following the steps in
cover" on page 76.
7
Remove the keyboard by following the steps in
page 79.
8
Remove the LCD assembly by following the steps in
on page 91.
9
Remove the palm rest by following the steps in
page 104.
10
Remove the system board by following the steps in
and VGA cooling assembly" on page
1 black M2.5×3 (Right
speaker)
"Preparing the notebook" on page
58.
"Replacing the IEEE 802.11 wireless card" on page
128.
7 black M2.5×5 (System
board)
55.
"Replacing the main
"Replacing the hard drive"
"Replacing the DVD drive" on
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the LCD assembly"
"Replacing the palm rest" on
"Replacing the system board
63.