Gateway MG1 Service Manual page 122

116
CHAPTER 3: Replacing notebook components
2
If the notebook has wireless networking built in, unplug the wireless antennas by
following the steps in
3
Remove the hard drive by following the steps in
page 69.
4
Remove the keyboard cover by following the steps in
cover" on page 76.
5
Remove the keyboard by following the steps in
page 79.
6
Remove the LCD assembly by following the steps in
on page 91.
7
Remove the palm rest by following the steps in
page 104.
8
Remove the touchpad board by following the steps in
board" on page 108.
9
Remove the touchpad button board by following the steps in
touchpad button board" on page
10
Remove the fingerprint reader from the notebook.
11
Place the new fingerprint reader into the notebook in the same orientation as the
old reader.
12
Replace the touchpad button board by following the steps in
touchpad button board" on page
13
Replace the touchpad board by following the steps in
board" on page 108.
14
Replace the palm rest by following the steps in
page 104.
15
Replace the LCD assembly by following the steps in
on page 91.
16
Replace the keyboard by following the steps in
page 79.
17
Replace the keyboard cover by following the steps in
cover" on page 76.
18
Replace the hard drive by following the steps in
page 69.
19
If the notebook has wireless networking built in, reconnect the wireless antennas
by following the steps in
"Replacing the IEEE 802.11 wireless card" on page
112.
112.
"Replacing the IEEE 802.11 wireless card" on page
"Replacing the hard drive" on
"Replacing the keyboard
"Replacing the keyboard" on
"Replacing the LCD assembly"
"Replacing the palm rest" on
"Replacing the touchpad
"Replacing the
"Replacing the
"Replacing the touchpad
"Replacing the palm rest" on
"Replacing the LCD assembly"
"Replacing the keyboard" on
"Replacing the keyboard
"Replacing the hard drive" on
63.
63.