Panasonic KX-UDS124 Installation Manual page 48

4 Deployment Procedure
•
After clicking Start CS Registration, when the number of registered SIP-CSs reaches the number
specified in Number of CS, "Complete" is displayed and registration stops automatically.
•
Click Stop CS Registration to quit registration.
•
If you want to register all SIP-CSs in step 3, select the maximum number of SIP-CSs. In this case, after
the detected SIP-CSs have been registered, wait 5 minutes for the timeout display or click Stop CS
Registration.
•
After registration, check the CS Registered List to confirm that the SIP-CSs have been registered.
Notice
•
After registering the SIP-CS to the Air Sync Master CS, when the SIP-CS cannot connect to the Air
Sync Master CS, the LED of the SIP-CS flashes red slowly.
48 Installation Guide