Configuring The Ssh Client - Cisco IOS XR Configuration Manual

How to Implement Secure Shell
Command or Action
Step 9
ssh server
or
ssh server v2
Example:
RP/0/RP0/CPU0:router(config)# ssh server
or
RP/0/RP0/CPU0:router(config)# ssh server v2
Step 10
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit
Step 11
show ssh
Example:
RP/0/RP0/CPU0:router# show ssh
Step 12
show ssh session details
Example:
RP/0/RP0/CPU0:router# show ssh session details

Configuring the SSH Client

Perform this task to configure an SSH client.
SUMMARY STEPS
1.
2.
Cisco IOS XR System Security Configuration Guide
SC-154
configure
ssh client knownhost device:/filename
Implementing Secure Shell on Cisco IOS XR Software
Purpose
Brings up an SSH server.
To bring down an SSH server, use the no ssh server
•
command.
(Optional) Forces the SSH server to accept only SSHv2
clients if you configure the SSHv2 option by using the ssh
server v2 command. If you choose the ssh server v2
command, only the SSH v2 client connections are accepted.
Saves configuration changes.
When you issue the end command, the system prompts
•
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
Use the commit command to save the configuration
•
changes to the running configuration file and remain
within the configuration session.
(Optional) Displays all of the incoming and outgoing
SSHv1 and SSHv2 connections to the router.
(Optional) Displays a detailed report of the SSHv2
connections to and from the router.