Cisco IOS XR Configuration Manual page 243

Implementing Management Plane Protection on Cisco IOS XR Software
Command or Action
Step 5
interface { type instance | all}
Example:
RP/0/RP0/CPU0:router(config-mpp-inband)# interface
POS 0/5/0/0
RP/0/RP0/CPU0:router(config-mpp-inband-POS0_5_0_0)#
Step 6
allow { protocol | all}
Example:
RP/0/RP0/CPU0:router(config-mpp-inband-POS0_5_0_0)#
allow SSH
How to Configure a Device for Management Plane Protection
Purpose
Configures a specific inband interface or all inband
interfaces as an inband interface. Use the interface
command to enter management plane protection
inband interface configuration mode.
Among the list of interfaces, RP and SRP Ethernet
interfaces cannot be configured.
Use the all keyword to configure all interfaces.
•
Configures an interface as an inband interface for a
specified protocol or all protocols.
• Use the protocol argument to allow
management protocols on the designated
management interface.
HTTP or HTTPS
–
SNMP (also versions)
–
Secure Shell (v1 and v2)
–
– TFTP
Telnet
–
• Use the all keyword to configure the interface to
allow all the management traffic that is
specified in the list of protocols.
Cisco IOS XR System Security Configuration Guide
SC-231