Configuring A Banner; Configuring Auto-Upgrade - Cisco IOS XR Configuration Manual

How to Implement IKE Security Protocol Configurations for IPSec Networks

Configuring a Banner

This task describes how to configure a banner for a Cisco Easy VPN server.
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
Step 2
crypto isakmp client configuration group group-name
Example:
RP/0/RP0/CPU0:router(config)# crypto isakmp client
configuration group cisco
RP/0/RP0/CPU0:router(config-group)#
Step 3
banner { banner-text }
Example:
RP/0/RP0/CPU0:router(config-group)# banner
thequickbrowndog

Configuring Auto-Upgrade

This task describes how to configure automatic update parameters for a Cisco Easy VPN remote device.
SUMMARY STEPS
1.
2.
3.
Cisco IOS XR System Security Configuration Guide
SC-40
configure
crypto isakmp client configuration group group-name
banner {banner-text}
configure
crypto isakmp client configuration group group-name
auto-update client {type-of-system} {url url} {rev review-version}
Implementing Internet Key Exchange Security Protocol on Cisco IOS XR Software
Purpose
Enters global configuration mode.
Specifies which group's policy profile is defined and
enters ISAKMP group configuration mode.
If no specific group matches, you are
•
automatically given the default group's policy.
The default group is also used for the other
•
attributes so they must also be checked and
updated.
Specifies the text of the banner.