Bowflex TreadClimber TC20 Assembly Manual page 22

Assembly
14. Connect Power Cord to Treadle Assembly
Note: The TC20 TreadClimber
11
15. Final Inspection
Inspect your machine to ensure that all fasteners are tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance
with the Owner's Manual.
22
fi tness machine is designed to plug directly into a properly wired and
®
grounded three prong 120V outlet. If you connect the machine to an outlet with GFI (ground fault
interrupt) or AFI (arc fault interrupt), machine operation can cause the circuit to trip.