7.5.6 IR Function
The IR Function setting activates the IR Cut (IRC) filter for electronic day/night operation. The
day/night IRC switching mechanism operates according to the ambient light level, rather than
activation of the IR LED mode. The drop-down menu enables you to select from Auto/On/Off/Smart
modes. The default mode is Smart.
Following is an explanation of the four settings:
Auto Mode – The camera converts from Day mode (color) to Night mode (monochrome)
automatically at nighttime or in low light conditions. When there is sufficient light, the
camera converts automatically from Night mode to Day mode.
On – Activates IR mode (puts camera into monochrome/Night mode).
Off – Deactivates IR mode (puts camera into color/Day mode).
Smart – Smart mode enhances monochrome/Night mode stability when IR illumination is
dominant and keeps the camera from switching between Day and Night modes. In this
mode, the IR Cut filter is on (i.e. monochrome/Night mode) when the IR LED illuminator also
is activated. This prevents the camera from returning to color/Day mode.
Press <√> to confirm the new setting.
Figure 85: Camera Settings Screen – IR Function
Configuration and Operation
87