Network; Figure 35: Network Screen - Quasar CF-4251 User And Installation Manual

Quasar CF-4251 User and Installation Guide
Settings

Identity – Enter the user identity associated with the certificate. Up to 16 characters can be
used.

Private Key Password – Enter the password associated with the user identity. Up to 16
characters can be used.
Enable IEEE 802.1X
Check the box to enable IEEE 802.1X. Click

7.3.3 Network

From the System screen, click the Network tab. A drop-down menu appears with tabs including
Basic, QoS, SNMP, and UPnP.
Related Links
 
Basic QoS (Quality of Service)
7.3.3.1 Basic
You can connect to the camera with either fixed or dynamic (DHCP) IP address. The camera also
provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who connect to the
network via PPPoE.
The screen is divided into three sections: General, Advanced and IPv6 Configuration. See Figure 35:
Network Screen.
1. General
Select one of the following options in the General area for configuring network settings:

Get IP address automatically (DHCP)
If you select Get IP address automatically, you can use the DNA utility, which is provided in the
supplied CD, to obtain the IP address. See
34
Save
to save the IEEE 802.1X/EAPTLS setting.

Figure 35: Network Screen


SNMP Settings
Using the DNA Utility to Search and Access the

UPnP
Camera.