Table of Contents
Advertisement
The Parameter screen enables viewing all of the system's parameter settings.
Note:
Slide the sidebar located on the right of the screen to view the entire list of
parameters.
7.3.17 Factory Default
The Factory default page is shown below. Follow the instructions to reset the camera to factory
default settings if needed.
Full Restore
Click Full Restore to restore the factory default settings. The system restarts in 30 seconds.
Note:
The IP address and all other settings will be restored to factory default settings.
Figure 62: Parameter List Screen
Figure 63: Factory Default Screen
Configuration and Operation
63
Advertisement
Table of Contents
