Figure 54: Video File Recording List - Quasar CF-4251 User And Installation Manual

Device setting
Click Format to format the memory card.
Disk cleanup setting
Enable automatic recording cleanup by selecting Enable automatic disk cleanup. From the pull-down
menu, specify the minimum length of time over which to remove recordings. For example, remove
recordings over 10 days old. Enter the percent of disk capacity used in order to remove the oldest
recordings. Click Save when finished.
Recording List
Each video file on the microSD/SDHC card is listed in the Recording list below. The maximum file size
is 60 MB per file. See Recording
When the recording mode is set as Always (consecutive recording) and the microSD/SDHC card
recording is enabled by events triggered, the system immediately saves a recorded event on the
memory card once an event occurs. Then the camera will return to the regular recording mode after
events recording.

Remove – To remove a file, first select the file and then click Remove.

Sort – Click Sort to list the files in the Recording list in order of name and date.
Note:
The capital letters: R, N, A, (A0), M, (M0) followed by an underscore, appear at the
beginning of the file name. They denote the type of recording.

R - Regular (always or schedule)

N - Network failure

M - Motion, (M0 refers to the first motion window trigger)

A - Alarm (A0 refers to the first alarm trigger input).

Download – To open/download a video clip, first select the file and then click download. The
selected file window pops up as shown below. Click on the AVI file to play the video in the
player or download it to a specified location.
for further details.

Figure 54: Video File Recording List

Configuration and Operation
55