7.3.8 Application
The Application screen enables control over the input and output alarms. If, for example, an event is
recognized by the system, an input or output alarm and message is generated.
The alarm input and output connectors are shown in the table below.
Pin No.
Alarm Switch
The Administrator can enable or disable the alarm function (Off/On).
Alarm Type
Select an alarm type (Normal close or Normal open) that corresponds to the alarm application.
Figure 44: Application Screen
Table 5: Input/Output Alarm Connections
Designation
1
Input (+)
2
Input (-)
3
Output (+)
4
Output (-)
Configuration and Operation
Terminal Block Alarm
Connections
43