Table of Contents
Advertisement
Enable IP Filter
1. Check the box to enable the IP Filter function. Once enabled, the listed IP addresses (IPv4) are
allowed/denied access to the camera.
2. Select Allow or Deny from the drop-down menu.
3. Click the Apply button to determine the IP Filter behavior.
Add/Delete IP Address
1. Enter the IP address in the Filtered IP Addresses text box.
2. Click Add to add a new filtered address. The Filtered IP Addresses box shows the currently
configured IP addresses. Up to 256 IP address entries may be specified.
3. To remove an IP address from the list, select the IP address and then click Delete.
7.3.2.4 IEEE 802.1X
The camera is allowed to access a network protected by 802.1X/EAPOL (Extensible Authentication
Protocol over LAN). Users must contact the network administrator to obtain certificates, user IDs,
and passwords.
CA Certificate
The CA certificate is created by the Certificate Authority for the purpose of validating itself. Upload
the certificate to check the server's identity.
Client Certificate/Private Key
Upload the Client Certificate and Private Key to authenticate the camera.
Figure 34: IEEE 802.1X/EAP-TLS Screen
Configuration and Operation
33
Advertisement
Table of Contents
