Viewing Fuel Gauges; Viewing Video - Garmin GPSMAP 4208 Owner's Manual

Gpsmap 4000 series
Hide thumbs Also See for GPSMAP 4208:
Table of Contents

Advertisement

V
I
www.reelschematic.com
IeWInG
nformatIon
www.reelschematic.com

Viewing Fuel Gauges

To view fuel gauges from the Home screen, select
total fuel flow, fuel level in each tank, total fuel remaining, fuel economy, and the range for your
boat are shown.
NOTE: To view fuel information, your unit must be connected to an external fuel sensor, such as the
Garmin GFS 10.
To synchronize your fuel gauges with your fuel:
From the Home screen select
Fill Up All Tanks—Select when your tank is full. An estimate of the total fuel is shown. Adjust
if necessary.
Add Fuel To Boat—Select when you have added less than a full tank. An estimate of the fuel
added is shown. Adjust if necessary.
Set Total Fuel Onboard—Select to specify the total fuel in your tanks.
Econ Source—Select to specify the speed source (GPS Speed or Water Speed) for the Fuel
Economy gauge.
Reset Odometer—Select to reset the odometer (located on the speedometer).

Viewing Video

Your unit can display video if you connect to a video source (or sources) using the supplied video
cable. See the GPSMAP 4000/5000 Series Installation Instructions for details.
To view video from the Home screen, select
Select
Menu
to setup the following:
Source—selects the video device (Video 1 or Video 2) that will display the video. If you have
two video sources and wish to alternate between the two, select
of time each video is displayed.
Aspect—switches between the standard aspect ratio and a stretched aspect ratio. The video
cannot be stretched beyond the dimensions provided by the connected video device. Because of
this, the stretched video may not fill the entire screen of the GPSMAP 4212 chartplotter.
Brightness—adjusts the brightness of the video feed up or down. Select
automatically adjust the brightness.
Saturation—adjusts the color saturation up or down. Select
automatically adjust the saturation.
Contrast— adjusts the contrast up or down. Select
the contrast.
Standard—selects the video format used by the source (PAL or NTSC). Select
unit automatically select the source format.
0
Information
Information
>
Fuel
> Menu.
Information
> Fuel. Fuel flow for each engine,
> Video.
Alternate
to define the amount
Auto
Auto
to allow the unit to
Auto
to allow the unit to automatically adjust
GPSMAP 4000 Series Owner's Manual
to allow the unit to
Auto
to let the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 4212Gpsmap 4210

Table of Contents