Garmin GPSMAP 4208 Owner's Manual page 29

www.reelschematic.com
www.reelschematic.com
6. Select Done
To create a route in another location:
1. From the Home screen, select
2. By pressing the ROCKER, use the map pointer (
the new route.
3. Select Add Turn
4. Choose the location of the first turn and select
5. Select Done
To create a route using Auto Guidance:
1. From the Navigation chart, select your destination.
2. Select Navigate To
NOTE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate To
creating a route.
To edit a route
1. From the Home screen, select
2. Select the route to edit.
3. Select Edit
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select Navigate To
GPSMAP 4000 Series Owner's Manual
to finish the route or Cancel Route
Information
to mark the starting point of the route.
when the route is complete.
> Guide To. Your route is calculated.
> Route To. The auto guidance path stays on the screen, allowing you to trace it while
Information
Route. You can edit the route name, turns, or delete the route.
> Go To (or Route
to delete the route.
> User Data > Routes
) to select the initial location you want to start
Add Turn. Repeat until the route is complete.
User Data > Routes.
>
To).
W
here
> New Route.
t ?
o
2