Table of Contents
Advertisement
Installation
Enter the user name
The transmission header not only contains
the terminal ID but also the user name.
This can contain up to 20 characters.
Each digit features several characters
which can be activated by repeatedly
pressing the corresponding key. If you
have found a character of your choice,
press the „#" key to got to the next
position. Use the „*" key to got back one
letter and make any corrections. Use the
„0" key to select special characters.
If you enter too many characters, press
the CANCEL key to delete the unwanted
characters.
When the name is complete, press the
START key.
Example: TOSHIBA
10
GB
Installation
6 x
Standby mode
Start the menu
Confirm with START
Page through the menu...
...until this menu item appears
Confirm with START
Make your selection
Enter the name
Example: TOSHIBA
1 x 8 = T #
3 x 4 = I #
3 x 6 = O # 2 x 2 = B #
4 x 7 = S # 1 x 2 = A
2 x 4 = H #
Name is complete
Confirm with START
Press STOP, return to standby
mode
TOSHIBA
TF 461
Advertisement
Table of Contents
