1.3
Transceiver Unit FS-1575T (FS-1575),
FS-2575T (FS-2575), FS-5075T (FS-5075)
Select a location that meets these conditions:
• Install only on a bulkhead.
• Select a location which provides good ventilation.
• The location must be clean and dry.
• Make sure the location can hold the unit under the conditions of continued vibration and shock
normally found on the boat. If necessary, increase the strength the installation location.
• Follow the compass safety distance shown in the Safety Instructions to prevent the interference
to a magnetic compass.
• Follow the recommended service space shown in the outline drawing to provide space for main-
tenance and checking.
• Install the unit away from direct sunlight to prevent overheating.
Fasten the unit with 6×30 self-tapping screws. Refer to the outline drawing for installation dimen-
sions.
1.4
Handset HS-2003
Unfasten six screws to remove the bracket cover. Fasten the bracket to the location with two self-
tapping screws 4x16 (supplied).
Handset
bracket cover
Screws
77
65
57
6
1. HOW TO INSTALL THE SYSTEM
φ
2-
4.5
Fixing hole