1. HOW TO INSTALL THE SYSTEM
1.2.3
Installation procedure
Outdoor installation
Fasten the Antenna Coupler to a bulkhead of the bridge, mast, handrail, etc., with the M6 bolts
(local supply).
For installation on the mast, see section 1.5 to select a location. Weld suitable mounting fixtures
(local supply) to the mast and bolt the coupler there.
Indoor installation
Fasten the Antenna Coupler to a bulkhead on the bridge or the overhead. Select a location where
the distance between the lead-in insulator and the coupler is as short as possible.
Lead-in
insulator
Stand-off
insulator
Fix with four
M6 bolts
(local supply).
Mounting fixture
(Local supply)
Pictured: AT-5075
Antenna switch
From antenna selection switch
Installation on a bulkhead
5
DO NOT install
coupler horizontally.
Installation on the overhead