Electrical Connection - Blodgett DFG-100 XCEL Installation And Operation Manual

Wiring diagrams are located in the control compartment
and on the back of the oven.
This oven is supplied for connection to 115 volt grounded
circuits. The electric motor, indicator lights and related
switches are connected through the 6' electric supply cord
found at the rear of the oven.
hz
U.S. and Canadian installations
60
Australia and General Export installations
50
ELECtRiCAL SPECiFiCAtionS
volts
115
220-240
WARninG!!
this appliance is equipped with three prong
grounding type plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle. Do not cut or remove the ground-
ing prong from this plug.
The Blodgett Oven Company cannot assume responsibil-
ity for loss or damage suffered as a result oF improper
installATION.
Phase Amps
1 10
1 5
13
Installation

Electrical Connection

Electrical Connection
(minimum size)
Cord set provided
Size per local code