Electrical Connection - Blodgett DFG-50 Installation Operation & Maintenance

Installation

Electrical Connection

Wiring diagrams are located in the motor access panel
and on the back of the oven.
This oven is supplied for connection to 115 volt grounded
circuits. The electric motor, indicator lights and related
switches are connected through the 6' electric supply cord
found at the rear of the oven.
The Blodgett Oven Company cannot assume respon-
sibility for loss or damage suffered as a result of im-
proper installation.
hz
U.S. and Canadian Installations
60
Australia and General Export Installations
50
ELECTRICAL SPECIFICATIONS
Volts
115
220-240
WARNING!!
This appliance is equipped with three prong
grounding type plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle. DO NOT cut or remove the ground-
ing prong from this plug.
Phase Amps
1 5
1 3
14
Electrical Connection
(minimum size)
Cord set provided
Size per local code