Upgrading Firmware (E/Osi) - IBM TotalStorage SAN16M-R SAN Installation And Service Manual

Chapter 3: Maintenance and troubleshooting

Upgrading firmware (E/OSi)

© Copyright IBM Corp. 2007
Use the links below to access the major topics in this chapter.
Section
Upgrading firmware (E/OSi)
Upgrading bootrom (E/OSi)
Troubleshooting overview
SAN Router LEDs
SAN Router troubleshooting
GE port troubleshooting
Serial Management Console troubleshooting
Retrieving the system log
Accessing SNMP alerts or alarms
Performing a loopback test
Cleaning fiber-optic components
This section provides information on how to upgrade firmware on
the SAN Router. This details the constraints and limitations involved
in upgrading firmware, tips for migrating to 5.0 version, and steps to
follow for downloading and activating the firmware or restoring a
previous firmware version for the SAN Router.
NOTE: You may also need to upgrade the bootrom file if you have another
version installed. Refer to
if you need to upgrade and to view the upgrade instructions.
Upgrading bootrom (E/OSi)
Page
41
46
48
52
53
56
57
57
58
60
61
on page 46 to determine
41