Before Connecting To Iphone - Citizen Eco-Drive Proximity Instruction Manual

Instruction manual: CITIZEN Eco-Drive Proximity

Before connecting to iPhone

This watch communicates with iPhone through the connection of
Bluetooth 4.0, which is featured Bluetooth Low Energy (BLE) power-
saving technology.
It is required for connection to install and start up a dedicated app
"CITIZEN ECO-DRIVE Proximity" on a compatible iPhone.
The flow for connection is shown as follows.
Install the dedicated app
Start up the app
Registration/Pairing
Connection
Disconnection
• Screen in this manual may differ from the actual app.
iPhone connectable with this watch
To check the latest information on compatible iPhone and iOS, visit
the following sites:
• Citizen Watch global site: "http://www.citizenwatch-global.com/"
"Service & Support"
Set the mode to [DCT] (see page 6a) to use this watch as a standard
one in places such as an airplane, where electronic devices are
limited to use.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
a
Functions available with the connection
Automatic adjustment of time and calendar [Time Sync]
The watch adjusts time and calendar automatically using time info
provided from the iPhone.
Time info
The second hand points
Cellular phone network
"ACT" while receiving time
info from iPhone.
Incoming call notification [Incoming Call]
Incoming call alert comes to the watch since iPhone's call reception.
Incoming
Incoming call info
Call
The watch vibrates twice
and the second hand points
Cellular phone network
"CALL" as it receives
incoming call info.
Schedule notification [Schedule Alert]
The watch receives schedule notification from the built-in Calendar
app on your iPhone, corresponding to the setting of the app.
Schedule notification
Schedule
info
notification
b
Email reception notification [Email Alert]
Email alert comes to the watch since iPhone's email reception to the
account set on the dedicated app.
Email
notification
ACT
Cellular phone network
Link Loss alart (Bluetooth disconnection notification) [Bluetooth Link Loss Alert]
The watch notifies iPhone's disconnection due to their distance.
CALL
iPhone search [iPhone Search]
The watch sends signals to the registered iPhone within the
connectable range.
• This function is also available when they are disconnected.
MAIL
The watch vibrates twice
and the second hand
The iPhone sounds
points "MAIL" as it receives
(depending on the setting)
notification info.
as it receives the signal.
MAIL
Email notification
info
The watch vibrates twice
and the second hand
points "MAIL" as it receives
notification info.
Bluetooth connectable range
5 m (16-1/2 feet) to 10 m
(33 feet)
LL
The watch vibrates twice and
the second hand points "LL" as
it detects disconnection.
Bluetooth connectable range
5 m (16-1/2 feet) to 10 m
(33 feet)
ACT
The second hand points "ACT"
as it starts to send signals.
c
4