Features; Component Identification; Charging Your Watch; Charging Watch - Citizen Eco-Drive Proximity Instruction Manual

Instruction manual: CITIZEN Eco-Drive Proximity

Features

Connectable with your iPhone using Bluetooth 4.0
through the dedicated app, and equipped with the
following features:
• Automatic Time Sync on page 6c
• Incoming Call Alert on page 6c
• Link Loss Alert on page 7a
• iPhone Search on page 7a
• Email Alert on page 7b
• Schedule Alert on page 7a
Eco-Drive (solar powered): Never needs a new battery. This watch is
fueled by light.
Chronograph: Measure elapsed time up to 60 minutes.
Local time: Easy to see the time for a second time zone, anywhere in
the world.
Perpetual calendar: Once set, the date will automatically adjust for
months shorter than 31 days as well as leap years.
* "Eco-Drive" is Citizen's proprietary technology.

Component identification

1
5
Upper right button ( )
2
6
3
Crown
7
4
Lower right button ( )
8
1 Hour hand
2 Notification indication for connecting to iPhone (see page 5a)
3 24-hour hand on the upper left sub dial
4 Second hand/Chronograph second hand
5 Function hand and function indications on the upper right sub dial
• Connection status (see page 5a)/Power reserve level (see page 3a)
• Chronograph minute hand
• Day of the week
6 Minute hand
7 Date indication
8 Mode hand on the lower sub dial (see page 3bc)
The illustrations in this instruction manual may differ from the actual
appearance of your watch.
a

Charging your watch

This watch has a rechargeable cell which is charged
by exposing the dial to light, such as direct
sunlight or fluorescent lamps (refer to page 2bc for
charging guidelines).
After taking off the watch, put it in a location
where the dial is exposed to bright light, such as by
a window.
For optimal performance, be sure to:
• Expose the watch to direct sunlight half a day at least once a week.
• Avoid leaving the watch in dark places for long periods of time.
Caution
• Do not charge the watch at high temperature (about 60°C/140°F or higher).
• If the watch is obscured from light by long sleeves frequently, supplemental
charging may be needed to ensure continual operation. Refer to page 2bc.
When the watch reaches a low charge state (insufficient charge warning
function)
When the power reserve becomes low, the second
hand moves once every two seconds. This is the
insufficient charge warning function. Be sure to
fully charge your watch as outlined on page 2bc.
• When the watch is sufficiently charged, the
second hand will move normally.
• If you do not charge the watch for 10 days or
longer after the insufficient charge warning movement has begun,
the watch will be depleted of all power and stop.
Caution
• When in the insufficient charge warning state, the current time and date are
indicated. However, other features and functions of the watch will not be
available for use.
Charging time by environment
Below are the approximate times required for charging when exposing
the watch dial to light continuously. Please use this table as a reference
only.
*
Charging time (approx.)
Illuminance
To start working
Environment
To work for
(lx)
normally when the
one day
cell is discharged
Outdoors
12 minutes 3.5 hours
100,000
(sunny)
Outdoors
30 minutes 6.5 hours
10,000
(cloudy)
20 cm (7-7/8
inches)
1.5 hours 15 hours
away from a 3,000
fluorescent
lamp (30W)
8 hours 80 hours
Interior lighting 500
b
• To charge your watch, it is recommended to expose the dial to
direct sunlight. Optimal charging is achieved by exposing the dial to
direct sunlight outdoors for a short time each day.
Power reserve in normal use from fully charged without additional
charging
With connecting to iPhone
About 8 months
*
When the watch is connected to your iPhone about 6 hours a day and
received messages about 10 times a day, you can use the connecting feature
between the watch and your iPhone about 30 days in 8 months. For details,
see page 3a.
Caution when connecting to iPhone
• Connecting to iPhone requires a substantial amount of power, especially if
receiving many notifications. Be sure to keep your watch fully charged when
utilizing this feature.
• We recommend disconnecting with iPhone when not needed (see page 6a).
• Connecting feature does affect battery usage on your iPhone. Be sure to
check the charge level of your iPhone.
Power save function
If your watch is not exposed to light sufficient for charging for 30
minutes or more, the second hand will stop in order to conserve
power. Although the second hand is not moving, the correct seconds
are stored in memory.
The power save function cannot be activated manually; it is an
automatic feature only. The power save function does not operate
under the following conditions:
• The crown is in position or .
• The current mode is Chronograph [CHR] or Calendar [CAL].
• The second hand is indicating a notification ("MAIL"/ "CALL"/ "LL").
Canceling the power save function
The power save function is automatically canceled when the watch
is exposed to light sufficient for charging. The second hand will then
resume normal movement.
• The power save function will also be canceled if a notification is
received from your iPhone. Note: the watch must be sufficiently
charged and the dedicated app running on your iPhone in order to
receive notifications.
• If the watch is in the power save state for long period of time, adjust
the time and date before use through the iPhone connection (see
To become fully
page 6c) or manually (see page 8b).
charged when the
cell is discharged
13 hours
30 hours
90 hours
600 hours
2
Without connecting to iPhone
* About 17 months
c