Checking The Current Power Reserve; Changing The Mode - Citizen Eco-Drive Proximity Instruction Manual

Instruction manual: CITIZEN Eco-Drive Proximity

Checking the current power reserve

This watch has a power reserve display feature when in [TME], [L-TM],
[PR], [CT], or [DCT] mode.
Power reserve indication (Function hand on the upper right sub
dial)
Without iPhone
connection
• If the current power reserve is not displayed (the watch is in [CAL]
or [CHR] mode), change the mode (see page 3a).
• When connecting to iPhone, pay particular attention to the power
reserve to ensure sufficient power is available.
The power reserve level
Level 3 2
With connecting to iPhone within 6 hours a
day
Up to 10 days Up to 15 days Up to 5 days
Without connecting to iPhone
Up to 3 Up to 5
Up to 2 months
Approximate
months months
duration of
Power reserve Power reserve Power reserve is
indication at
is sufficient is sufficient for getting low. The
this level
for all features all operations watch should be
and functions. at this level. fully charged to
Optimal ensure optimal
performance performance.
is achieved at
this level.
When the power reserve is at level "0", basic watch functions can be used.
*
However, registering (see page 5bc) and connecting to iPhone (see page
6b) are not available. If the watch is connected to your iPhone and the
power reserve becomes at level "0", the connection will be disconnected
automatically.
a

Changing the mode

This watch features eight different modes (functions). Change the
mode by rotating the mode hand on the lower sub dial before using
each mode.
With iPhone
connection
1 0
7 months *
Power reserve
is not sufficient
for normal
operation. The
watch must be
fully charged.
Charge the watch immediately.
Mode indications and functions
24-hour hand
Mode hand
1
Pull the crown out to position .
The second hand moves to indicate the 30 seconds
position.
The second hand indicates the 30 seconds position.
2
Rotate the crown to select a mode.
• Each time you rotate the crown, the mode hand on
the lower sub dial moves.
Rotate the crown until the mode hand indicates the
mode you wish to use.
Proper location Improper location
Ex. When selecting [L-TM]
• You may turn the mode hand either clockwise or
counterclockwise.
• The hands/indications function differently in each
mode. See page 3bc for more details of each mode
and the functions of the hands/indications in each
mode.
3
Push the crown in to position to finish the
procedure.
Time — [TME]
Function hand • Normally, use the watch in
[TME] or [L-TM] mode.
[TME]
The currently set time is displayed.
• The function hand on the upper
right sub dial indicates the power
reserve in this mode.
b
Pairing/Connecting/Disconnecting of iPhone — [PR]/[CT]/[DCT]
[PR] (Pairing) [CT] (Connect)
Select this when you want Select this mode when
to connect (pair/register) you want to connect your
the watch to your iPhone watch to your iPhone
for the first time. (See after initial pairing. (See
page 5b.) page 6b.)
• Time indication is same as either [TME] or [L-TM].
Chronograph — [CHR]
Local time — [L-TM]
[L-TM]
Select this to display the time of Select this when you want to use the
chronograph. (See page 9a.)
another area (local time). (See page
9a.)
• The second hand: Indicates the
• The 24-hour hand on the upper chronograph seconds.
• The function hand on the upper
left sub dial, date and day of the
right sub dial: Indicates the
week display local time.
• The function hand on the upper chronograph minutes.
right sub dial indicates the power
• The hour, minute and 24-hour
reserve in this mode.
hands will continue to reflect the
time set in [TME] or [L-TM] mode.
Calendar — [CAL] The reference position — [302]
[CAL]
Select this to display the calendar. The current reference position of
(See page 8b.)
each hand/indication is indicated.
(See page 9b.)
• The second hand: Indicates the
year/month.
• The function hand on the upper
right sub dial: Indicates the day of
the week.
• The hour, minute and 24-hour
hands will continue to reflect the
current time set in [TME] mode.
c
3
[DCT] (Disconnect)
Select this when you
disconnect the watch
from your iPhone. (See
page 6a.)
[CHR]
[302]