Connecting To The Registered (Paired) Iphone [Ct] - Citizen Eco-Drive Proximity Features Manual

Connecting to the registered (paired) iPhone [CT]

You can re-connect with the registered iPhone in the following cases:
• When the watch mode is set to [ TME ], [ L-TM ] or [ CT ]
• When the second hand indicates the second.
(While the second hand indicates a notification type, stop the notification indication by
pressing and holding either the lower right button
seconds.)
1
Turn on Bluetooth on the iPhone.
2
Press and release the upper right button
The watch and the iPhone are connected and the function hand on
the upper right sub dial of the watch points to the area (" ON " area)
illustrated on the right.
• The watch is also connected when its mode is changed to [ CT ].
or upper right button
.
11
for two
Function hand
on the upper
right sub dial