CYCLE PARTS
5.5.2.
CHANGING THE PADS
FRONT BRAKE
•
Remove the calliper, see (REMOVING THE
FRONT WHEEL).
•
Unscrew and remove the central screw (1).
WARNING
These operations apply to both brake callipers.
•
Release the retainer (2).
•
Slide off the two pins (3).
•
Slide out the brake pads.
WARNING
Always change both pads and ensure they are
correctly in place inside the calliper.
Do not reverse retainer (2) position upon
reassembly.
•
Install two new brake pads.
•
Slide in the two pins (3).
•
Refit the retainer (2).
•
Tighten the central screw (1).
•
Correctly install the brake callipers onto brake
discs.
5 - 28
SCARABEO 500