Removing The Brake Force Distribution - APRILIA Scarabeo 500 Workshop Manual

CYCLE PARTS
5.5.3.

REMOVING THE BRAKE FORCE DISTRIBUTION

•
Remove the front cover, see (REMOVING THE
FRONT COVER).
•
Loosen and remove the three screws securing the
immobilizer control unit.
•
Move aside the immobilizer control unit keeping it
connected to the wiring.
•
Drain the braking system.
•
Loosen and remove the two screws (1) and bleed
valve (2), collect the gaskets.
NOTE Mark the brake lines to ensure correct position at
reassembly.
•
Protect the three brake lines to avoid fluid leakage.
•
Loosen and remove the two screws (3) securing the
brake force distributor.
•
Remove the brake force distributor.
NOTE When reassembling, bleed the braking system, see
(BRAKING SYSTEM).
5 - 30
SCARABEO 500