SCARABEO 500
CHANGE
•
Position the vehicle on firm and flat ground.
•
Position the vehicle on the centre stand.
WARNING
Allow several minutes for the engine and
exhaust system to cool down.
•
Unscrew and extract the plug/dipstick (1).
•
Set a collector tank with a capacity of more than 300
cu.cm (18.3 cu.in) under drain screw (2).
•
Loosen and remove the drain screw.
•
After draining all transmission fluid, tighten the drain
screw (2).
•
Pour about 250 cu.cm (15.2 cu.in) of transmission fluid
into the filler opening.
•
Screw and tighten the plug/dipstick (1).
•
Start the engine and let it run for several minutes. Stop
the engine and let it cool down.
•
Check again transmission fluid level.
GENERAL TECHNICAL INFORMATION
2 - 23