APRILIA Scarabeo 500 Workshop Manual page 113

SCARABEO 500
REAR BRAKE
• Remove the rear wheel, see (REMOVING THE
REAR WHEEL).
• Remove the circlip.
•
Slide the pin.
•
Remove the spring.
WARNING
On spring is an arrow that should always be
pointing in the direction of travel.
•
Slide out the brake pads.
WARNING
Always change both pads and ensure they are
correctly in place inside the calliper.
•
Install two new brake pads.
•
Insert the spring.
•
Fit the pin.
•
Fit the circlip.
CYCLE PARTS
5 - 29