Be Sure To Always Follow These Guidelines; Warning - Nikon SMZ1500 Instructions Manual

Be sure to always follow these guidelines.

WARNING

2
1. Intended use of this product
This product is intended only for microscopy. Do not
use it for any other purpose.
2. Do not disassemble
Disassembly may result in damage to the instrument.
Never disassemble any part except as described in this
operation manual. Contact your Nikon representative if
you notice any malfunction of this instrument.
3. Check the input voltage
When using an illuminator, check that the input voltage
displayed on the power supply of the illuminator
matches the operating voltage. Contact your Nikon
representative if the displayed voltage does not match the
operating voltage. Use of an improperly matched
illuminator may result in damage to equipment.
4. Power cord
Always turn the power switch off and unplug the power
cord when replacing the lamp of an illuminator as failure
to do so may result in electric shock or equipment
damage.
5. Heat from the light source
When using an illuminator, do not place cloth or paper or
highly flammable materials, such as gasoline, benzene,
thinner or alcohol, near the lamp as there is a danger of
fire.
• Always use lamps that are of the specified rating only.
For the lamp rating, please refer to the operation
manual.
• Always turn the power switch off and unplug the
power cord when replacing the lamp of a illuminator
as failure to do so may result in electric shock or
equipment damage.