18
6.3
FLAME CHARACTERISTICS
It's important to periodically perform a visual check of the pilot and
burner fl ames. Compare them to the illustrations provided. If any fl ames
appear abnormal call a service person.
6.4
RESTRICTING VERTICAL VENTS
Some vent confi gurations may display a very active
fl ame. If this appearance is not desirable, the vent exit
may be restricted using a restrictor plate. Bend the fl ap
up as shown to reduce the velocity of the exhaust gases,
slowing down the fl ame pattern and creating a more
traditional appearance.
W415-0223 / G / 06.04.12
3/8" - 1/2"
FLAME MUST
ENVELOP UPPER
3/8" TO 1/2" OF
THERMOCOUPLE &
THERMOPILE
54.2