Iwatsu ADIX-VS Technical Manual page 130

ADIX-VS Technical Manual
Programming
Class Item
04 70
Conditions
1. When 1 (All Calls) is selected in Class 04.70<NUM36>, no indication is given to distinguish
between abandoned calls and answered calls.
2. Regardless of the programming in Class 04.70<NUM36>, only abandoned calls will be denoted
with "ABN" in the Note column of the SMDR printout.
3. When 1 (All Calls) is selected in Class 04.70<NUM36>, the Caller ID/ANI/DNIS information is
not stored until the call is disconnected.
4. When 1 (All Calls) is selected in Class 04.70<NUM36> and the call is transferred or forwarded,
the USAS key will light only at the final destination station.
5. When 1 (All Calls) is selected in Class 04.70<NUM36> and the call is being monitored by
another system extension, the USAS key will light only at the extension connected to the outside
trunk.
6. When 1 (All Calls) is selected in Class 04.70<NUM36> and the called extension receives a
Whisper Page from another system extension, the USAS key will light only at the extension
connected to the outside trunk.
7. When 1 (All Calls) is selected in Class 04.70<NUM36> and a trunk-to-trunk conference is
initiated that is not subject to holding or forwarding, USAS key indication is not provided.
Indication of the call is provided only on the USATn key. If the trunk-to-trunk conference is
subject to forwarding or holding, the USAS key at the station that initiated the forward or hold
will provide indication of the stored call.
8. If call disconnection is initiated by forced release, information provided with that call will not be
stored.
Num Description
36 Determines if Caller ID/ANI/DNIS information is saved
for All Calls or Abandoned Calls Only
Section 5 – ADIX-VS Feature Enhancements
Input
0 = Abandoned Calls Only
1=All Calls
120
Default
0