Table of Contents
Advertisement
Important Information
Please read this manual carefully before installing, setting up and using the In-Wall Rear
Projection SMART Board™ interactive whiteboard.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
Other Precautions
For operating safety and to avoid damage to the interactive whiteboard and its parts, please read
the following information carefully.
•
Move the interactive whiteboard and its components with care.
•
If you transport the interactive whiteboard over a distance, completely repackage it using the
original packaging. This packaging was designed with optimal shock and vibration protection.
If the original packaging is no longer available, pack all components with as much padding as
reasonably possible to ensure that they are not exposed to excessive vibration or shock.
99-00479-03 REV B0
The projector behind the screen is a high brightness light source. Don't look directly
into the beam of light. Prevent children from staring directly into the beam of light.
To reduce the risk of fire or electric shock, don't expose this product to rain or
moisture.
Don't remove the protective cover from the rear surface of the SMART Board
interactive whiteboard until you have completely installed it in the wall opening. If
this cover is accidentally removed, don't leave any fingerprints on the rear surface.
If you do smudge the rear of the screen, spray a soft cloth with alcohol-free glass
cleaner, and then gently and carefully dab the surface until the marks are removed.
Don't spray the cleaner directly onto the rear of the screen.
Never, under any circumstances, apply isopropyl alcohol, water or acetone to the
rear surface of the interactive whiteboard. These fluids could damage the diffusion
coating, resulting in a permanent deterioration in display quality.
If your interactive whiteboard includes a mirror stand, be very careful if you have to
move or adjust the mirror stand after you've removed the cross braces. Don't apply
pressure to any part of the screen opening and in particularly to the upper corners.
Avoid pushing the mirror stand because excessive pressure may cause it to lose its
square shape. If you do move or adjust the stand, either lift it from the bottom or
push it at the bottom.
If your interactive whiteboard includes an NEC VT676 projector, please note that
this projector has been designed for use under normal operating conditions only.
Normal operating conditions are defined as product use that does not exceed eight
hours per day and 260 days per year. Exceeding these operating conditions could
cause projector damage. Damage caused by such extended use is not covered by
the product warranty.
Important Information
i
Advertisement
Table of Contents
