Shipping Contents; Contents Of The Shipping Cartons; Tool Required (Not Included) - Jet 708315BTA Operating Instructions And Parts Manual

Contents of the Shipping Cartons

The contents that are contained in the shipping
carton are determined by the model of your
purchase which is determined by the three letter
suffix following the stock number, which is
708315.
Remove all contents from the shipping carton.
Keep the saw table upside down. Do not discard
the carton or packing material until the saw is
assembled and is running satisfactorily.
Important: Packing material is placed inside the
saw to provide support for the motor during
shipping and must be removed.
Compare the contents of the shipping carton
against the Contents Table (following page) for
your particular model. The Index No. in the table
corresponds to the items shown above and this
is your key for identifying each part.

Tool Required (Not Included)

5mm hex wrench (1 ea)
6mm hex wrench (1 ea)
14mm wrenches (2 ea)
10 mm wrenches (2 ea) or
10mm wrench and socket (1 ea)
Contents of the Table Saw Carton
8

Shipping Contents

Cross-point Screwdriver (1 ea)
Hardware (actual size)
Blade Removal Tools