2. Preparation
Help Button
2.2 Help function
The unit contains helpful information which can
be printed for quick reference.
Basic settings:
How to set the date, time, your logo and fax
number.
Feature list:
How to program the features.
Directory:
How to store names and numbers in the
directory and how to dial them.
Fax receiving:
Help with problems to receive faxes.
Copier:
How to use the copier function.
Reports:
List of available reports.
Caller ID:
How to use the Caller ID service.
{HELP}
{<}{>}
1
Press {HELP}.
2
Press {<} or {>} repeatedly to display the
desired item.
3
Press {SET}.
L The selected item will be printed.
Volume
18
2.3 Adjusting volume
2.3.1 Ringer volume
4 levels (high/medium/low/off) are available.
While the unit is idle, press {A} or {B}.
L If any documents are in the document
entrance, you cannot adjust the ringer
volume. Confirm that there are no documents
in the entrance.
To turn the ringer OFF:
1
Press {B} repeatedly to display the
following.
2
Press {SET}.
{SET}
While the ringer volume is set to OFF:
When a call is received, the unit will not ring and
will display the following.
Ringer pattern
L You can select one of three ringer patterns for
external calls (feature #17, page 38).
2.3.2 Monitor volume
8 levels (high to low) are available.
While using the monitor, press {A} or {B}.
Initial Programming
{A}{B}
RINGER OFF= OK?
YES:SET/NO:STOP
L To turn the ringer back on, press {A}.
INCOMING CALL
{SET}
RINGER OFF