Table of Contents
Advertisement
1
Lift open the front cover (1), holding OPEN
(2).
1
2
Caution:
The fuser unit (3) gets hot. Do not
touch it.
2
Remove the jammed paper.
When the recording paper has jammed
near the drum and toner unit:
Remove the jammed paper (1) carefully by
pulling it toward you.
2
L Do not touch the transfer roller (2).
When the recording paper has jammed
near the recording paper exit:
1. Remove the recording paper (1), then
remove the drum and toner unit (2) to
3
1
allow the jammed paper (3) to pull free
from the rear cabinet.
3
2. Lift both green levers (1) forward until
they stop.
1
3. Remove the jammed paper (1) from the
fuser unit by pulling it upwards carefully,
then install the drum and toner unit.
1
7. Help
1
2
49
Advertisement
Table of Contents
