Figure 4.61 Installing The Lcd Hinge Assembly - Toshiba Satellite A500D Series Maintenance Manual

4 Replacement Procedures
Installing the LCD Module and Inverter Board
Install the inverter board according to the following procedures.
1. Turn the LCD module cover and place it face down on a protective surface such as a
foam pad.
2. Connect the LVDS cable to the LCD panel connector.
3. Turn the LCD right side up.
4. Seat the LCD hinge assembly in the correct position beside the LCD panel and secure it
with six M2x3 screws according to the sequence indicated in Figure 4.61.
2
3
1
Satellite A500D Maintenance Manual

Figure 4.61 Installing the LCD Hinge Assembly

Error! Style not defined. Error! Style not defined.
2
3
1
4-62