Figure 4.52 Press The Bezel Hinge Wall; Figure 4.53 Press The Bottom Hooks On The Display Assembly - Toshiba Satellite A500D Series Maintenance Manual

Error! Style not defined. Error! Style not defined.
Installing the Display Mask
Install the LCD bezel assembly according to the following procedures.
1. Seat the LCD bezel assembly in the correct position.
2. For the low-end model, press the bezel hinge wall against the cover hinge wall as shown
in Figure 4.52. For the high-end model, press on the bezel hinge wall to fasten the hooks
to the cover hinge wall.
3. Press the bezel downside hook near the hinge wall as shown in Figure 4.53.

Figure 4.53 Press the bottom hooks on the display assembly

Satellite A500D Maintenance Manual

Figure 4.52 Press the bezel hinge wall

4 Replacement Procedures
4-55